Search
Menu

You are here Home E-shop E-SHOP Analog cables Power 230V cables Oyiade VONDITA / C-037/P-037e Rhodium

Oyiade VONDITA / C-037/P-037e Rhodium 150cm

Brand: Oyaide
If you want the perfect cable, it's here! New technology for wire production, storage and braiding ... 102.30% wire purity, stored in special silk cotton .... together with the original Oyaide connector, it is hard to stand comparison! More

Select a variant

In stock

569 € Including EARF and VAT
+

Description - Oyiade VONDITA / C-037/P-037e Rhodium 150cm

used the latest recommended technologies:

+ two best components of the brand: Oyaide VONDITA cable and the new generation C-037 / C-037e rhodium connector
+ rhodium-plated forks are used for crimping, which are pressed into the end of the cable 6 times
+ used the latest technology Nano liquid solution for impregnation of all joints
+ if you want to have a TOP cable then this is him !!

 

VONDITA TA-X
Premise: Evil tone. Based on this concept, the VONDI TA-X was developed. Some say it is a magical and some even a artistic, beautiful and magical work of art VONDI TA-X. The singing voice comes from a quiet space and its mysterious and shiny tone will continue to fascinate the hearts of people who listen to music.


Properties
It uses the precision "102 SSC" wire that Oyaide Electric is proud of. To avoid contamination by impurities, we use only pure copper, which does not contain any recycled copper among the copper, which complies with JIS C 1011. 100% of the impurities adhering to the surface are removed by polishing. In order to smooth the flow of electrical signals flowing on the surface of the conductor, the wire is thinned by a natural diamond matrix to improve the smoothness of the wire surface. Wire thinned with a machining accuracy of ± 1 μm, which far exceeds the standard error tolerance of ± 8 μm. It is the first cable is adopted cable 3E cable with different diameter with high density. (patented). Increases the density and roundness of springs and stabilizes electrical properties. Mechanical stress on the wire is eliminated by annealing twice. Thorough product management with data on production control, maintenance, shipping days, etc. It reaches the highest class 102.3% IACS / wire cleanliness /. For example, the new Shunyata Research Omega / 8,000 euros / has the same purity.


storage
Luxuriously used fine silk storage, drain wire with a double spiral resembling DNA and an outer sheath combining different materials. All of them are crystals of our commitment to thorough vibration control. Vibration countermeasures are an important factor for sound and have been compromised in the cable's internal design without compromise. The silk wrap is also effective in suppressing static electricity. With these internal designs and a 4.0sq internal conductor with a special twisted structure using the "102SSC" precision conductor, the harmony they create is excellent in spatial expressiveness while quiet, and the music is played while maintaining optimal band balance.


Insulator
After an in-depth analysis for the insulator, we chose a polymeric polyolefin that has different degrees of hardness inside and out to prevent the negative effects of unwanted vibrations. In addition, this material has a quarter permittivity compared to conventional PVC, and we have paid special attention to strengthening the cohesiveness of its insulator and conductor to fill the clearance and maintain high quality signal transmission.


specifications
Three-core cable construction
wire 102SSC (hot / cold / ground)
Wire area 4.0sq
High molecular weight polyolefin insulator
shield Copper foil tape
PVC + polyolefin outer shell
Cable outer diameter 13.0 mm

Power connector P-046e / C-046

Each of our products is completely "made in Japan", even on a small part, all in order to maintain our high standard of quality and reliability, and it is therefore essential that we have every production system under our direct and strict control. Our products are designed for a special market where slight vibrations caused by loose connections or imperfect material selection could become a major failure.
■ Contacts
The base material is deoxidized phosphor bronze (thickness 1.4 mm) for strength and safe contact. Once connected, they can take a load of over 7 kg. The surface is thoroughly polished twice.
■ Plating
The production process is started with a primer. The material that has been stamped as a part is polished by hand piece by piece on a machine polished cylinder.
Plating P-046 / C-046 is a combination of silver and rhodium, which were selected on the basis of repeated listening tests. The inner layer of silver is 1.5 microns thick and the outer layer of rhodium is 0.3 microns thick.
■ Body
30% PBT filled with glass has excellent machine capability and provides excellent electrical insulation. The highly rigid body of the P-037 / C-037 effectively dampens high-speed vibrations. All screws, which were originally designed for the P / C series, are made of high-strength stainless steel, which is a non-magnetic material. In addition, the cable cannot be detached from the plug with a force of less than 30 kg, which is an important safety feature.
■ Stainless steel screws
The P / C series screws are made of high-strength stainless steel, so their head won't collapse even if you give them too much force. In addition, because it is a non-magnetic material, it helps to achieve a high S / N ratio without being magnetized at its connecting part.
■ Outer cover
The outer cover of the P / C series is made of PC (PolyCarbonate) for rigidity and hardness. It helps dampen small vibrations in a fast response and reduces distortion due to its excellent mechanical strength.

Specifications:
inner parts: deoxidized phosphor bronze (surface buff)
plating: Silver (1.5 microns) + palladium (0.3 microns)
install cable OD min. 6.5 mm, max 17.0 mm
Maximam AWG10 wire gauge (5.5 m2)
Rated V / A:
P-037: 125 V ・ 15 A E
C-037: 125V / 15A, 250V / 16A E, CE
P-037e: 250V / 16A CE

Up